Best Tile Leveling Systems

By Epic Van Life Editorial Team · Updated October 11, 2026

Last updated: October 11, 2026

The best tile leveling system overall for most projects is the DGSL Tile Leveling System with Plier, 600 Tile Spacers 1/8″ and 200 Wedges, because it pairs the most common joint width — 1/8 inch, or 3 mm — with a complete clip-and-wedge kit and the tensioning plier you need to actually use it, so there is nothing else to buy before you start. It suits anyone tiling a bathroom floor, a kitchen backsplash, a shower wall, or a small-format van or RV project where a 3 mm grout line is the right look. If you want to spend as little as possible, the Leorossy system covers the same clip-and-wedge concept with a plier and reusable wedges at a budget-tier price. If you are committed to a tight 1/16-inch (1.5 mm) joint across a large area, the premium DGSL 2400-piece 1/16-inch clip pack gives you the volume to finish without reordering. The sections below compare clip-and-wedge against reusable-cap designs by joint width, kit volume, reusable parts, and how much work it takes to pull the parts once the thinset cures.

Top 3 Picks

Best overall: DGSL Tile Leveling System with Plier (600 clips + 200 wedges, 1/8″). It is the only pick here that combines a standard 3 mm joint, a genuinely useful clip-to-wedge ratio, and a plier in one box. For a typical 100–150 square foot porcelain floor or a tub surround, it is enough kit to finish the job without a mid-project order.

Best budget: Leorossy Tile Leveling System with Tile Plier (300 clips + 100 reusable wedges, 1/8″). Same working concept, smaller volume, lower price tier. It is the right call for a single small room, a backsplash, or a first tiling job where you would rather not tie up money in clips you will not use.

Best premium: ALBO Tile Leveling System Set 1/8 inch, 400 PCS. The reusable-cap design is the one to look at if you tile more than once a year, because the caps survive repeated jobs while only the clips are consumed. It is also the most wall-friendly kit in this roundup. If tight joints matter more than reusability, the DGSL 1/16-inch 1000-clip-and-200-wedge kit is the better premium alternative.

Quick Comparison

See also: MaxxFan Deluxe vs Fantastic Fan for Vans: Which to Choose? • Can I Lay LVP in a Van? Van Flooring Guide

How We Chose

This roundup is built from published listing specifications and established facts about how tile leveling hardware works, not from hands-on trials. Every product here was assessed on five things. First, joint width: 1/8 inch (3 mm), 1/16 inch (1.5 mm), and 1/32 inch (0.8 mm) each suit different tile types, so a system that only exists in one width cannot be “best” for everyone. Second, kit completeness: a clip pack with no wedges and no plier is a refill, not a starter kit, and it is labeled that way here. Third, clip-to-wedge ratio: wedges are reused through a job while clips are consumed, so a 3:1 ratio behaves very differently from a 1:1 ratio. Fourth, reusability: cap-style and wedge-style systems have different long-term costs, and the caps are the only genuinely multi-job reusable part in this category. Fifth, upgrade path: whether the parts you buy now stay useful if you add a second size later. Price tier reflects general market positioning only; listing prices move constantly.

1. DGSL Tile Leveling System with Plier – Best Overall

DGSL Tile Leveling System with Plier, 600 Tile Spacers 1/8" and 200 Wedges

Included for 'Best Tile Leveling Systems' because the listing specifies 600 Tile Spacers 1/8" and 200 Wedges, details this guide uses to compare options.

View on Amazon →

This is the kit to buy when you want one box that covers a normal tiling job start to finish. It ships with 600 clips at 1/8 inch (3 mm), 200 wedges, and a plier, which means you are not hunting down a tensioning tool halfway through a Saturday. The 3 mm joint is the default for ceramic and porcelain floors and for most wall tile, so it is the width that causes the fewest surprises with grout lines that need to look consistent from across the room.

Who it suits: a homeowner or van converter tiling a bathroom floor, a kitchen backsplash, a shower surround, or a small entryway — somewhere between 60 and 150 square feet. It also suits anyone who has never used a leveling system before, because the plier removes the guesswork about how hard to push a wedge.

Key specs

• Joint width: 1/8 inch (3 mm)
• Clips (spacers): 600 pieces, single-use
• Wedges: 200 pieces, reusable in practice
• Clip-to-wedge ratio: 3:1 — you leave clips in place and move wedges forward as you go
• Tensioning tool: plier included
• Clip design: flat-base clip that snaps off flush at the joint after the thinset cures
• Best substrate use: floors and walls, interior; porcelain, ceramic, and stone-look tile
• Not designed for: 1/16-inch or 1/32-inch rectified joints

The math on coverage is the reason this kit earns the top spot. A 12×12 tile needs roughly four clips at its corners, so 600 clips covers around 150 tiles — about 150 square feet. Switch to 12×24 tile and you will typically want six clips per tile for reliable leveling, which puts 600 clips at roughly 100 tiles, or about 200 square feet of floor. Either way, the volume lines up with the size of job a typical DIY tiler actually takes on.

The 3:1 wedge ratio is the second reason. Because you only need enough wedges to keep the current row and the row behind it under tension — usually 30 to 60 at a time — 200 wedges is generous. It means you can work in long runs without stopping to pry wedges out of cured clips, and it means a dropped or stepped-on wedge does not end your day.

Pros

• Complete kit: clips, wedges, and plier in one purchase
• 1/8-inch (3 mm) joint width works with the widest range of tile
• 600 clips covers roughly 150 square feet of 12×12, or about 200 square feet of 12×24
• Generous wedge count means fewer mid-row retrievals
• Clips snap off at the base cleanly once the thinset has cured

Cons

• Premium price tier for what is ultimately a plastic consumable kit
• No 1/16-inch option, so it is the wrong choice for rectified tile with tight joints
• The included plier is a basic tool; heavy users may want a sturdier one later
• Clips are single-use, so the volume is a real cost, not an investment

How it compares: the nearest alternative is the Storystore 1/8-inch kit, which carries the same 600 clips and 200 wedges but no plier and sits a tier lower. If you already own a plier, Storystore is the smarter buy. If you do not, the DGSL kit saves you a separate purchase and a second delivery. Against the Leorossy kit, this is simply twice the volume at a higher tier — worth it above about 80 square feet, unnecessary below it.

2. Leorossy Tile Leveling System with Tile Plier – Best Budget Starter Kit

Leorossy Tile Leveling System with Tile Plier, 300PCS 1/8 Inch Spacers Clips and 100PCS Reusable Wedges, Tile Leveling System Kit for Floor Wall Ceramic Stone Installation

Included for 'Best Tile Leveling Systems' because the listing specifies 300PCS 1/8 Inch Spacers Clips and 100PCS Reusable Wedges, details this guide uses to compare options.

View on Amazon →

Leorossy’s kit is the entry point that still gives you everything needed to finish a small job: 300 clips at 1/8 inch (3 mm), 100 wedges listed as reusable, and a plier. It is the right answer when the project is one room and you would rather not sink money into clip volume you will never touch again.

Who it suits: a first-time tiler doing a backsplash, a powder room floor, a laundry room, or a van or RV galley wall. It is also a sensible pick if you already own a larger wedge set and only need clips.

Key specs

• Joint width: 1/8 inch (3 mm)
• Clips: 300 pieces, single-use
• Wedges: 100 pieces, reusable
• Clip-to-wedge ratio: 3:1
• Tensioning tool: tile plier included
• Coverage estimate: roughly 75 square feet of 12×12, or about 100 square feet of 12×24
• Best for: single-room floors, backsplashes, wall tile

The volume is the whole story here. At four clips per 12×12 tile, 300 clips handles about 75 tiles. At six clips per 12×24, it handles about 50 tiles — around 100 square feet. That is a genuine single-room number, and it is why this kit is a starter kit rather than a compromise. Buying 600 clips to tile a 40-square-foot powder room means throwing away half a kit.

The wedges being reusable matters more than it sounds. Because you cycle wedges forward as rows cure, 100 wedges is plenty of working stock for a one-person job, and they carry over to the next project. The clips do not. That asymmetry is the core economics of every clip-and-wedge system, and it is why a budget kit is often better value than a premium one for a one-off job.

Pros

• Lowest entry cost among the complete kits here
• Plier included, so no separate tool purchase
• Wedges are reusable across future jobs
• Standard 1/8-inch joint suits most ceramic and porcelain
• Right-sized for a single small room rather than oversized

Cons

• 300 clips runs out quickly on anything above roughly 100 square feet
• No 1/16-inch version for tight rectified joints
• Basic plier build quality typical of budget kits
• Budget-tier clip plastic can be more brittle in cold weather

How it compares: the Gickbusus kit is nearly the same package — 300 clips, 100 wedges, 1/8 inch, plier included — so the two are effectively interchangeable and the choice comes down to which is available when you order. Against the DGSL 600-clip kit, Leorossy is half the volume at a lower tier; if your floor is above about 80 square feet, spend the extra.

3. DGSL Tile Spacers 2400 Pcs Tile Clips – Best for Tight 1.5 mm Joints at Volume

DGSL Tile Spacers 2400 Pcs Tile Clips, Tile Leveling System Clips 1/16 Inch

Included for 'Best Tile Leveling Systems' because the listing specifies Tile Leveling System Clips 1/16 Inch, details this guide uses to compare options.

View on Amazon →

This is a clips-only pack of 2,400 pieces at 1/16 inch (1.5 mm), and it exists for one purpose: covering a large area in a tight joint width without stopping to reorder. If you are laying rectified porcelain with a 1.5 mm grout line across a whole floor, this is the volume that makes the job practical.

Who it suits: someone who already owns wedges and a plier and is now buying the consumable that actually runs out. Also suits anyone tiling a large open floor — an open-plan living area, a basement, a long hallway — where 1,000 clips would leave them short.

Key specs

• Joint width: 1/16 inch (1.5 mm)
• Clips: 2,400 pieces, single-use
• Wedges: not included
• Tensioning tool: not included
• Clip-to-wedge ratio: N/A — supply clips only
• Coverage estimate: roughly 600 square feet of 12×12, or about 400 square feet of 12×24
• Best for: large floors in rectified porcelain or ceramic

The coverage math is worth doing before you buy, because 2,400 sounds like a lot until you convert it. At four clips per 12×12 tile, that is 600 tiles — about 600 square feet. At six clips per 12×24, it is 400 tiles — about 400 square feet, since each tile covers 2 square feet. For a typical single-room project, that is far more than you need. For a whole ground floor, it is roughly right.

There is a real trade-off in the 1.5 mm width itself. Tight joints look sharp on rectified tile, where the edges are machined square and the tiles are all nominally identical. On non-rectified tile — where edges vary slightly — a 1.5 mm joint leaves almost no room for that variation, and you can end up with visible lippage that the leveling system cannot correct because the clip has nowhere to sit.

Pros

• 2,400 clips is enough for a full floor in one purchase
• 1/16-inch joint gives the clean, tight look rectified tile is designed for
• Premium-tier clip plastic tends to snap off more cleanly at the base
• Same clip family as the DGSL wedge kits, so wedges already owned still fit

Cons

• No wedges and no plier — this is a refill, not a starter kit
• 1.5 mm is the wrong width for non-rectified tile with uneven edges
• Premium tier means a higher spend if you are only tiling one small room
• Storing 2,400 loose clips requires a container that will not get crushed

How it compares: the closest alternative is the DGSL 2000-piece 1/16-inch clip pack at a mid-range tier. The difference is 400 clips and the tier itself. If your project is under roughly 300 square feet, the mid-range pack is the better buy. Above that, the 2,400-piece pack is the one that avoids a reorder. Against the Eunice 2,000-piece 1/8-inch pack, the choice is purely joint width, not volume.

4. Eunice Tile Spacers 1/8, 2000 Pcs Tile Leveling System Clips – Best Budget Bulk Clip Pack

Eunice Tile Spacers 1/8, 2000 Pcs Tile Leveling System Clips

Included for 'Best Tile Leveling Systems' because the listing specifies 2000 Pcs Tile Leveling System Clips, details this guide uses to compare options.

View on Amazon →

Eunice’s 2,000-piece clip pack is the budget route to a large floor at a standard 3 mm joint. It is clips only, so it assumes you already have wedges and a plier, but it puts a lot of consumable on the shelf for the lowest tier in this roundup.

Who it suits: a repeat tiler or a small contractor who goes through clips steadily and wants the cheapest per-piece route at the standard joint width. It also suits anyone finishing a large open floor in ceramic or porcelain where 1.5 mm is too tight for the tile edges.

Key specs

• Joint width: 1/8 inch (3 mm)
• Clips: 2,000 pieces, single-use
• Wedges: not included
• Tensioning tool: not included
• Coverage estimate: roughly 500 square feet of 12×12, or about 330 square feet of 12×24
• Best for: large floors where a 3 mm joint is appropriate

Budget-tier clips are not all identical to premium clips, and the difference shows up at removal. A clip has to do two contradictory things: hold the tile edges level while the thinset is wet, then break off at the base cleanly once it has cured. Cheaper plastic tends to either snap too early under tension or leave a stub at the joint that has to be cut flush with a utility knife. Neither is a disaster, but both cost time.

The other budget consideration is temperature. Plastic clips get more brittle in the cold, and van and RV work often happens in an unheated space. If you are tiling in a cold garage or an unheated van, budget clips are more likely to crack at the base during tensioning, which means a higher clip-per-tile allowance — plan for five or six clips per tile instead of four.

Pros

• Lowest price tier for bulk clips at the standard 1/8-inch joint
• 2,000 pieces covers roughly 500 square feet of 12×12
• 3 mm joint is the most forgiving width for non-rectified tile
• Cheap enough to over-buy and never run short mid-row

Cons

• Clips only — you still need wedges and a plier
• Budget plastic can snap unpredictably in cold conditions
• Removal sometimes leaves a stub that needs trimming
• No 1/16-inch option if your tile calls for a tight joint

How it compares: the direct alternative is the DGSL 2000-piece 1/16-inch pack at a mid-range tier. Same count, different joint width, different price tier — the DGSL is the pick if you need 1.5 mm, and the Eunice is the pick if 3 mm works and you want to spend less. Against the Storystore 600-clip kit, Eunice is over three times the volume for a large floor and clearly the better value once you pass 150 square feet.

5. ALBO Tile Leveling System Set 1/8 inch – Best Reusable-Cap Kit for Floors and Walls

ALBO’s 400-piece set is built around reusable caps rather than wedges, and that single design choice changes the economics of the whole kit. Caps thread or press onto the clip stem and can be pulled and reused job after job; only the clips are consumed. It is the kit in this roundup with the strongest case for anyone who tiles more than once.

Who it suits: a DIYer with several rooms still to do, a van or RV converter who will tile again in the next build, or anyone doing both floor and wall work in the same project. The kit is described as a professional floor and wall spacer kit, which reflects that the cap design is generally friendlier to vertical surfaces than wedges are.

Key specs

• Joint width: 1/8 inch (3 mm)
• Set size: 400 pieces total, clips plus caps
• Caps: reusable across multiple jobs
• Tensioning tool: a plier is listed with the kit
• Application: floors and walls, interior
• Best for: repeat users and mixed floor-and-wall projects

Reusability is where cap systems earn their premium tier. In a wedge system, the wedge is reusable but the clip is not, and you need a working stock of wedges roughly one-third the size of your clip stock. In a cap system, the caps are the reusable part and the clips are still consumed — but caps are typically heavier and more substantial than wedges, so they tolerate being pried off, wiped down, and reused many more times before they deform.

There is a handling difference too. Wedges are tapped in with a plier and driven sideways, which means a certain amount of lateral force goes into the tile edges. Caps seat more directly onto the clip stem. On wall tile, where gravity is already working against you and tiles want to slide, that more controlled seating is often the difference between a level course and one that creeps.

Pros

• Reusable caps mean lower cost per job over time
• Works well on both floors and vertical wall surfaces
• 400-piece set is a manageable size for a room-scale project
• Standard 1/8-inch joint suits most ceramic and porcelain
• Cap design gives more controlled tensioning than a tapped wedge

Cons

• Premium tier, and the higher cost only pays back if you tile repeatedly
• Caps must be cleaned of thinset before reuse or they will not seat properly
• 400 pieces total is modest volume for a large floor
• No 1/16-inch version for tight rectified joints

How it compares: against the Leorossy kit, ALBO costs more up front and less per job. If you are tiling one bathroom and never again, Leorossy is the rational choice. If you have a second bathroom, a kitchen, and a van build ahead of you, ALBO’s reusable caps are the better long-run decision. Against the DGSL 600-clip kit, the difference is design philosophy: DGSL gives you more single-use clips, ALBO gives you a smaller consumable pile and a reusable tool set.

6. DGSL 1/16 Inch Tile Leveling System, 1000 Tile Spacers and 200 Tile Wedges – Best Balanced 1.5 mm Wedge Kit

DGSL 1/16 Inch Tile Leveling System, 1000 Tile Spacers and 200 Tile Wedges

Included for 'Best Tile Leveling Systems' because the listing specifies 1000 Tile Spacers and 200 Tile Wedges, details this guide uses to compare options.

View on Amazon →

This kit sits in a useful middle ground: tight 1/16-inch (1.5 mm) joints, 1,000 clips, and 200 wedges. It is the pick when you want the crisp look of a narrow grout line but you are not laying a whole ground floor, so the 2,400-piece pack would be overkill.

Who it suits: anyone tiling a bathroom, a hallway, or a defined room in rectified porcelain where a 1.5 mm joint is the intended look. The 5:1 clip-to-wedge ratio makes it especially practical for a single worker, since wedges are cycled forward rather than consumed.

Key specs

• Joint width: 1/16 inch (1.5 mm)
• Clips: 1,000 pieces, single-use
• Wedges: 200 pieces, reusable
• Clip-to-wedge ratio: 5:1
• Tensioning tool: not included
• Coverage estimate: roughly 250 square feet of 12×12, or about 165 square feet of 12×24
• Best for: rectified porcelain floors and walls with tight joints

The 5:1 ratio is the most distinctive number here. With 1,000 clips and 200 wedges, you are implicitly expected to leave clips in place and keep moving the wedges forward. In practice you rarely need more than 40 to 80 wedges in active use at once, so 200 gives you real headroom — enough that a broken or lost wedge is a shrug rather than a problem.

What it does not include is a plier, and that is the one gap to plan for. A clip-and-wedge system without a tensioning tool means driving wedges by hand, which is slower and inconsistent. Budget for a plier if you do not own one, or step up to a kit that bundles it.

Pros

• 1.5 mm joint width suits rectified porcelain properly
• 1,000 clips is enough for a full bathroom or hallway
• 200 wedges gives a comfortable 5:1 working ratio
• Premium-tier clips tend to break off cleanly at the base
• Wedges carry over to future jobs

Cons

• No plier included — an extra purchase and an extra delivery
• 1.5 mm is unforgiving on non-rectified tile with uneven edges
• 1,000 clips is short for a large open floor
• Premium tier for what is still a consumable-led kit

How it compares: the obvious alternative is the DGSL 2,400-piece 1/16-inch clip pack, which is the same joint width and the same clip family with more than double the volume and no wedges. If you already own wedges and a plier, buy the 2,400 pack. If you own neither, this 1,000-clip-and-200-wedge kit plus a plier is the cleaner path. Against the DGSL 1/8-inch 600-clip kit, the difference is purely joint width and volume.

7. DGSL Tile Leveling System, 2000-Piece 1/16″ Tile Spacers Clips – Best Mid-Range Bulk 1.5 mm Clips

DGSL Tile Leveling System, 2000-Piece 1/16" Tile Spacers Clips Tile Tools

Included for 'Best Tile Leveling Systems' because the listing specifies 2000-Piece 1/16" Tile Spacers Clips Tile Tools, details this guide uses to compare options.

View on Amazon →

This is the mid-range answer to bulk 1.5 mm clips: 2,000 pieces at 1/16 inch, no wedges, no plier. It exists for the person who has already committed to a tight joint and a large area and wants the consumable at a lower tier than the premium 2,400-piece pack.

Who it suits: a repeat tiler laying rectified porcelain across a large floor — an open-plan room, a basement, a long run of hallway — who already owns the wedge and plier hardware. It is also a reasonable buy if you are splitting a big job across two weekends and want to guarantee you never run out mid-course.

Key specs

• Joint width: 1/16 inch (1.5 mm)
• Clips: 2,000 pieces, single-use
• Wedges: not included
• Tensioning tool: not included
• Coverage estimate: roughly 500 square feet of 12×12, or about 330 square feet of 12×24
• Best for: large floors in rectified tile, mid-range budget

At mid-range tier, the practical question is whether the clip plastic behaves well at removal. The failure mode to watch for is a clip that breaks at the wrong point — either above the joint line, leaving a stub you have to trim, or below it, leaving a fragment embedded in the thinset that has to be dug out before grouting. Both cost time, and both are more likely with thinner, more brittle plastic.

There is also a storage reality with 2,000 loose clips. They arrive bagged, and a bag of 2,000 thin plastic clips does not survive being sat on. Transfer them to a rigid container with a lid before the job starts, and keep the container off the floor in the work area. It sounds trivial until you have swept up 300 cracked clips.

Pros

• 2,000 clips at 1.5 mm covers roughly 500 square feet of 12×12
• Mid-range tier undercuts the premium 2,400-piece pack
• Same clip family as DGSL wedge kits, so existing wedges fit
• Tight joint width is exactly what rectified porcelain is designed for

Cons

• No wedges or plier included
• 1.5 mm is the wrong width for non-rectified tile with irregular edges
• Mid-range plastic may leave occasional stubs at removal
• Overkill for any project under about 250 square feet

How it compares: the premium DGSL 2,400-piece pack is the same joint width with 400 more clips at a higher tier — worth it only if your area exceeds roughly 300 square feet. Against the H-Fire Mid 2,000-piece 1/16-inch clip pack, the two are close in count and tier; the deciding factor is which clip family your existing wedges fit. Against the DGSL 1,000-clip-and-200-wedge kit, this pack trades wedges for double the clips.

8. Fleetise Tile Leveling System Kit with 100pcs Tile Leveler – Best Small-Job Kit

Fleetise Tile Leveling System Kit with 100pcs Tile Leveler

Included for 'Best Tile Leveling Systems' as a relevant option in this category; details come from the product listing.

View on Amazon →

Fleetise’s kit is the smallest option here — around 100 leveling pieces in a single kit — and it is honest about what it is for. This is not a floor kit. It is for a backsplash, a small vanity surround, a niche, or a repair, where buying 600 clips would be absurd.

Who it suits: someone fixing a handful of loose tiles, tiling a small backsplash, or doing a compact van or RV job where storage space matters as much as cost. It is also a reasonable way to try a leveling system for the first time before committing to a large kit.

Key specs

• Kit size: approximately 100 leveler pieces
• Joint width: not stated in the listing title — confirm in the product details before ordering
• Contents: clips and wedges bundled as a kit
• Coverage estimate: roughly 20 to 30 square feet, depending on tile size
• Best for: backsplashes, repairs, niches, and small-format work

The honest caveat here is the joint width. The listing title centers on the 100-piece count rather than the spacer width, so the width is the one spec you should verify in the product details before you buy. If you are tiling over an existing surface where the joint has to match what is already there, getting this wrong means the new tile will not line up with the old grout lines.

For small-format work, the leveling math changes completely. A 3×6 subway tile has a tiny footprint, and four clips per tile is a much higher clip density per square foot than for a 12×24. That means a 100-piece kit goes a short distance on a subway backsplash — plan on roughly 20 to 30 square feet — but it is still the right size for the job, because a larger kit would leave you storing hundreds of clips indefinitely.

Pros

• Small footprint — easy to store in a van, RV, or small workshop
• Low budget-tier cost for a try-it-out purchase
• Well matched to repairs, niches, and backsplashes
• Kit format means clips and wedges arrive together

Cons

• Joint width is not stated in the listing title — verify before buying
• Only covers roughly 20 to 30 square feet
• Not viable for a full floor
• Budget tier means basic component quality

How it compares: against the Leorossy 300-clip kit, Fleetise is roughly a third of the volume and lower cost — the right call only if your project is genuinely small. Against the Gickbusus kit, the same logic applies: Fleetise is the minimum viable purchase, Gickbusus is the minimum sensible one for a full small room.

9. Storystore 1/8 Inch Tile Leveling System, 600 Tile Spacers and 200 Wedges – Best Mid-Range Wedge Kit

Storystore 1/8 Inch Tile Leveling System, 600 tile Spacers and 200 Wedges

Included for 'Best Tile Leveling Systems' because the listing specifies 600 tile Spacers and 200 Wedges, details this guide uses to compare options.

View on Amazon →

Storystore’s kit mirrors the DGSL top pick on volume — 600 clips at 1/8 inch (3 mm) and 200 wedges — but sits a tier lower and does not include a plier. For anyone who already owns a tensioning tool, that combination is the sweet spot in this roundup.

Who it suits: a DIYer on their second or third tiling project who already has a plier and wants the standard joint width with enough clip volume to cover a full bathroom floor without reordering.

Key specs

• Joint width: 1/8 inch (3 mm)
• Clips: 600 pieces, single-use
• Wedges: 200 pieces, reusable
• Clip-to-wedge ratio: 3:1
• Tensioning tool: not included
• Coverage estimate: roughly 150 square feet of 12×12, or about 200 square feet of 12×24
• Best for: standard-width floors and walls on a mid-range budget

The 600-clip volume is the reason this kit works for a whole room. At four clips per 12×12 tile, 600 clips covers around 150 tiles — 150 square feet. Move to 12×24 at six clips per tile and it covers roughly 100 tiles, or about 200 square feet, because each tile is 2 square feet. Either way it lands squarely in “one bathroom floor plus a bit left over” territory, which is the most common DIY scope.

Without a plier, the practical difference is speed and consistency. A plier sets the wedge to a repeatable depth; hand-driving wedges means each one is set slightly differently, and the tiles respond accordingly. On a small floor that variation is usually invisible. On a large one, it accumulates into a visible wave across the room.

Pros

• 600 clips covers roughly 150 square feet of 12×12
• Mid-range tier undercuts the equivalent premium kit
• 200 reusable wedges carry over to future projects
• Standard 3 mm joint is forgiving across tile types
• Good balance of volume and price for a full room

Cons

• No plier included — you need one for consistent results
• No 1/16-inch option for rectified tile
• 600 clips is short for a large open floor
• Mid-range plastic quality is a step below premium clip families

How it compares: this is the direct alternative to the DGSL 600-clip top pick. Same clip count, same wedge count, same joint width — the only differences are the plier and the price tier. If you own a plier, buy Storystore. If you do not, DGSL saves you a separate purchase. Against the Leorossy 300-clip kit, Storystore is double the volume at a higher tier, which makes it the better buy above about 80 square feet.

10. Gickbusus Tile Leveling Kit, Plier, 300 Clips & 100 Wedges, 1/8″ Spacers – Best Budget Kit With Plier

Gickbusus Tile Leveling Kit, Plier, 300 Clips & 100 Wedges, 1/8" Spacers

Included for 'Best Tile Leveling Systems' because the listing specifies Plier and 300 Clips & 100 Wedges, details this guide uses to compare options.

View on Amazon →

Gickbusus packages the same working set as the Leorossy kit — 300 clips, 100 wedges, a plier, 1/8-inch spacers — at a budget tier. These two are effectively interchangeable, and the right pick is whichever is in stock and priced lower on the day you order.

Who it suits: a first-time tiler doing one small room, or anyone who needs a complete, self-contained kit with nothing else to buy. The included plier is the deciding feature at this tier.

Key specs

• Joint width: 1/8 inch (3 mm)
• Clips: 300 pieces, single-use
• Wedges: 100 pieces, reusable
• Clip-to-wedge ratio: 3:1
• Tensioning tool: plier included
• Coverage estimate: roughly 75 square feet of 12×12, or about 100 square feet of 12×24
• Best for: a single small room with a standard joint width

The included plier is worth more than it appears. A separate plier adds a purchase, a delivery, and the risk of buying one that does not grip your specific wedge profile well. At budget tier, bundling the tool removes that whole class of problem, and it means the kit is genuinely usable the day it arrives.

The 300-clip ceiling is the limit. Once you pass roughly 100 square feet, you will be reordering mid-job, and mixing clip batches partway through a floor is a mild annoyance at best. If your project is anywhere near 100 square feet, start with a 600-clip kit instead.

Pros

• Complete kit with plier — usable immediately on arrival
• Budget tier keeps the entry cost low
• Standard 1/8-inch joint suits most ceramic and porcelain
• 100 reusable wedges carry forward
• Well matched to a single bathroom or backsplash

Cons

• 300 clips runs out above roughly 100 square feet
• No 1/16-inch version
• Budget plier build quality is basic
• Near-duplicate of the Leorossy kit,
  

  Related Reviews & Guides

  

  Van Conversion

  10 Best LiFePO4 Battery 100Ahs for Van & RV Builds 2026

  

  Van Conversion

  Van Roof Fan Ventilation Maxxair Review

  

  Van Conversion

  Van Flooring Rubber Mat Vinyl Review

  

  Van Conversion

  Ram ProMaster Van Conversion Guide

  Related Posts

  • 4 Best Rooftop Tents for Van Life Cargo Van (2026)
  • Best Roof Vent Fans for Camper Vans: Rain Cover vs Rain Sensor, Airflow and Power Draw
  • Induction vs Propane Vanlife

  About the Epic Van Life Editorial Team

  The Epic Van Life editorial team covers life on the road: van builds, power and solar systems, cooking, travel routes and the gear that makes small-space living work. Guides draw on manufacturer data, electrical safety basics and the experience of full-time and weekend van travelers.

  You Might Also Like

  How to Convert a Ram ProMaster City Into a Camper10 Best Van Bug Screen Window Options to Keep Mosquitoes Out…Best Luxury Conversion Van Interior Package for Comfort Travel in 2026: Compared and RankedVanlife Flooring InstallationQuick Picks: Best Van Life Bike Racks for Rear Door MountingComposting Toilet Vanlife Comparison

  Explore Our Guides & Free Tools

  🔧 Van Solar & Battery Calculator (Free Sizing Tool)

  • 📚
  • 📚
  • 📚
  • 📚
  • 📚
  • 📚